INDUSTRIAL FLOOR PAINT – TWO-COMPONENT WATER-BASED EPOXY SYSTEM

Product Code: TH7

Packaging:
5L can, 1L can

FEATURES

TH7 is used as a coating for indoor concrete and cement-rendered surfaces, forming a film that allows moisture vapor transmission.
TH7 can also be used as a topcoat or as a putty/filler for repairing and covering asphalt concrete surfaces indoors.

Main Applications:
Floor and wall coatings for warehouses, industrial plants, manufacturing workshops, garages, power stations, and stadium grandstands.

COMPOSITION

The product consists of two liquid components: Component A and Component B. These two components must be mixed thoroughly before use. After mixing, the product must be applied within the specified pot life; beyond this time, the coating will exhibit reduced adhesion.

TECHNICAL SPECIFICATIONS
  • Krebs Viscosity (KU): 100    ASTM D562 (after mixing both components)
  • Density (kg/L): 1.25 ± 0.01    ASTM D1475
  • Gloss at 60°: 60°    ASTM E430
  • Abrasion Resistance (mg/1000 cycles): 60    ASTM D4060
  • Drying Time – Stage I (hours): 2.5    ASTM D5895-B
  • Drying Time – Stage II (hours): 3.0    ASTM D5895-B
  • Pencil Hardness (after 24 hours): 2    ASTM D3363
  • Pencil Hardness (after 7 days): 3    ASTM D3363
  • Impact Resistance (inch-pound): 40    ASTM D2794

Chemical Resistance (after 24-hour immersion):

  • pH: 14
  • NaOH 10%: Passes ASTM D1308
  • NaOH 20%: Passes ASTM D1308
APPLICATION INSTRUCTIONS

Surface Preparation:
Concrete surfaces must be dry, load-bearing, slightly rough, and free from dust, oil, grease, and any contaminants that may reduce paint adhesion.
If necessary, surface preparation may be carried out using sandpaper, grinding stones, high-pressure water, grinding machines, or hot air. Damp surfaces can also be treated effectively; however, standing water must not be present on the surface.

Storage:
Store in a cool, dry place. Avoid direct sunlight and heat sources. Keep containers tightly sealed when not in use.

Paint Waste Disposal:
Do not dispose of leftover paint into drains, sewers, or public areas.

Coverage:
Approximately 5 m²/kg/coat.

Sản phẩm cùng danh mục