SPORTS FLOOR PAINT – SINGLE-COMPONENT PU SYSTEM
Product Code: TH8
Packaging: 5L can, 18L pail
FEATURES
TH8 is used for coating sports courts, outdoor tennis courts, food processing plants, pharmaceutical factories, and medical equipment areas. The product is suitable for facilities exposed to high acidity and high alkalinity conditions.
COMPOSITION
Modified PU resin, fillers, water, additives, and pigments.
TECHNICAL SPECIFICATIONS
- Krebs Viscosity (KU): 100 ASTM D562
- Density (kg/L): 1.20 ± 0.01 ASTM D1475
- Gloss at 60°: 70° ASTM E430
- Abrasion Resistance (mg/1000 cycles): 60 ASTM D4060
- Drying Time – Stage I (hours): 1.5 ASTM D5895-B
- Drying Time – Stage II (hours): 3.0 ASTM D5895-B
- Pencil Hardness (after 24 hours): 1.5 ASTM D3363
- Pencil Hardness (after 7 days): 2.0 ASTM D3363
- Impact Resistance (inch-pound): 30 ASTM D2794
Chemical Resistance (after 24-hour immersion):
- pH: 14
- HCl 10%: Passes ASTM D1308
- H₂SO₄ 20%: Passes ASTM D1308
APPLICATION INSTRUCTIONS
Surface Preparation:
All surfaces must be thoroughly cleaned and mechanically abraded before application. The concrete substrate must be in good condition, free from deteriorated mortar. Any damaged areas must be removed and re-plastered. The surface should be relatively dry before painting.
Stir thoroughly until the paint is completely uniform before application.
Application:
Apply one even coat using a roller or brush. Subsequent coats should only be applied after the previous coat has fully dried. The paint may be diluted with clean water if necessary.
Storage:
Store in a cool, dry place. Avoid direct sunlight and heat sources. Keep containers tightly sealed when not in use.
.png)
